Preventive Maintenance Program - Quiz

Quiz Question

1. The purpose of preventive maintenance program in a building is to reduce the number of services orders to a point where buildings and structures are being maintained by scheduled work as much as possible.
True
False
2. Planning a preventive maintenance program is most effective when the work is accomplished on a cyclic basis.
True
False
3.

Cyclic preventive maintenance should be accomplished according to the following priorities:

 (a) Priority 1: Family Quarters

 (b) Priority 2: Other permanent facilities

 (c) Priority 3: Temporary Facilities

True
False
4. To insure the manpower requirements for preventive maintenance are accurately identified and properly documented which one of the following procedures should be followed.
Calculation of standard hours
Hours for between-occupancy preventive maintenance of family housing units.
Determination of manpower requirements for off-post facilities
Calculation of required manpower for each preventive maintenance area per cycle
Preparation of an individual job order for preventive maintenance areas
Automatic costing of preventive maintenance under I.F.S
All of the above
5. One principal for a successful preventive maintenance program is to minimize documentation, but still fully document preventive maintenance.
True
False
6. Preventive Maintenance cycles should generate fewer Service Orders as the work becomes systematized and long- standing maintenance requirements are reduced.
True
False
7. Preventive maintenance is most effective when the work is accomplished on a cyclic basis.
True
False
8. Buildings and structures with similar maintenance requirements should be located in common areas, unless other factors such as travel distance would make establishment of the area inadvisable.
True
False
9. In order to complete the scheduled cycle within a reasonable time frame, PM ( preventive maintenance) units should not undertake any maintenance or repair tasks beyond their capability.
True
False
10. The recommended length of an effective PM (preventive maintenance) cycle is between _____________________.
40 and 80 days
90 and 150 days
90 and 180 days